Stitch Patterns – Three Examples of Ribbing

August 7, 2009| Lindy| 0 Comment | 9:30 am

Categories:

3Ribbings

All ribbing is a combination of knit and purl stitches across a row. When you knit back on the next row, you knit the stitches as the face you, that is, knit the knit stitches and purl the purl stitches. The knit stitches form a ridge (or rib) and the purl stitches form a valley. Ribbing is essentially a reversible fabric. Ribbing is elastic crosswise and will stretch lengthwise and is most often used for sweater neckbands and bottoms and the cuff of socks. Ribbing also “pulls in” naturally, so it will effect the shape of your garment.

One-By-One (1×1) Ribbing:

This is knitted exactly as it says. Knit 1 stitch, purl 1 stitch across the row. (Remember to move your yarn from back to front as you knit and purl.) If you are knitting this ribbing flat for a garment, you should be knitting an odd number of stitches, so that when the garment is seamed together the ribbing will appear to be continuous. If you are knitting in the round, you should always have an even number of stitches. This ribbing is the most elastic of ribbings. It tends to look more loosely knit than stockinette stitch, and because it is so elastic, most patterns have you knit your ribbing on needles that are a size or two smaller than the body of the pattern.

Two-By-Two (2×2) Ribbing:

2x2Ribbing

This ribbing is made by K2, P2 across the row. It is a multiple of 4 stitches, so when knitting a flat piece to be joined with another, you should be knitting a multiple of 4 plus 1 stitch so that the pieces will weave together correctly. For knitting in the round, you would knit over a multiple of 4 stitches. This is a popular ribbing and it works well for sock cuffs, but it is not as elastic as the 1×1 ribbing.

Three-By-One (3×1) Ribbing:

3x1Ribbing

This ribbing is also a multiple of 4 stitches: K3, P1 across. The rules for 2×2 ribbing also apply to this ribbing. As you can see in the picture, this produces a wide rib with an almost invisible valley. I have seen this ribbing used in sock patterns and it does give the socks and attractive looking cuff.

Other Ribbing Patterns: There are many other variations of ribbing, including Cabled Ribbing, Four-By-Two Ribbing, and Six-by-Three Ribbing. I will include an example of Cabled Ribbing in a latter post on Cable Stitch Patterns.

Note: For information about tension issues with ribbing, see my post: Master Knitter Level I – Swatches # 1, 2, & 3.

Master Knitter Level I – Swatches #4, #5, & #6 – IncreasesMaster Knitter Level I – Swatches #4, #5, & #6 – Increases

March 4, 2010| Lindy| 0 Comment| 7:54 pm

Swatches 4 through 6 in the Master Knitter Level I program are all about increases. Specifically, each swatch demonstrates a particular type of increase. The increases are done on each side, with three stitches before the right edge increase and three stitches after the left edge increase.

Swatch 4 - Bar Increase

Swatch 4 demonstrates the Bar Increase. This is probably the increase most knitters first learned to make when knitting. It often written as “KFB” in patterns — which means “Knit in the front and back loops”. When you knit into the front loop of a knit stitch and then knit in the back loop of the same knit stitch, the resulting increase has a purl bump where the second stitch was made. It is clearly visible as you can see in this picture.

I learned a few things working on this swatch. Since I am now much more aware of my tension, I found that the purl bumps looked much better if I made certain I kept the tension even with both stitches. It’s much the same issue as when I had trouble getting even tension in ribbing.

Also, through my research, I learned that you should never make your increases on the very edge of your knitting — you should have at least one stitch on the edge before doing the increase. This makes it much easier and neater to do seams. This is something to pay attention to when you are knitting pieces that will be sewn together — I know I will practice this in my future knitting projects.

Swatch 5 - Make 1 Increases

Swatch 5 demonstrates Make 1 increases. On the right edge, I knit an M1R increase — which means “Make 1 Right” — this is a right-slanting increase. It is made by inserting the left needle from the back and lifting the horizontal strand between stitches onto the left needle and knitting into the front of this strand.

On the left edge, the increase is an M1L — which means “Make 1 Left” — a left-slanting increase. It is made by inserting the left needle from the front and lifting the horizontal strand between stitches onto the left needle and knitting into the back of this strand.

M1 increases are tighter and there is no purl bump on the front of the knitting.

Swatch #6 - Lifted Increases

Swatch 6 demonstrates the Lifted or Raised Increase. This is the most invisible of increases — and was an increase I had never used before, so the entire swatch was a learning experience.

Again, I knit a right-slanting increase on the right edge. This increase is done by lifting the stitch below the stitch on the left needle and knitting it.

The left-slanting increase on the left edge of the swatch gave me the most difficulty. I had to search out several different pictures of it in my references before I figured it out. The left-slanting lifted increase is done by lifting the stitch below the stitch just knitted on the right needle and then knitting it.

The best pictures and explanations I found of this increase, as well as the others, were in an online article at Knitty.com, entitled “Techniques with “Theresa – Increases”.

So, these three swatches improved my technique when knitting increases and I learned a method of increasing that I had never used before. Check out the article on Knitty.com if you want to explore these methods.

Stitch Patterns – Garter Stitch, Stockinette Stitch & Reverse Stockinette StitchStitch Patterns – Garter Stitch, Stockinette Stitch & Reverse Stockinette Stitch

August 1, 2009| Lindy| 0 Comments| 2:28 am

I have decided to blog about various stitch patterns from time to time. So I am starting with the time honored basics: the garter stitch, the stockinette stitch and the reverse stockinette stitch.

This discussion assumes you know how to do a knit stitch and a purl stitch. If you are new to knitting and are not familiar with these two stitches, click on this link: http://www.knittinghelp.com/videos/knit-stitch.

Garter Stitch: this stitch pattern is made by knitting every row, turning your knitting at the end of each row. (You would get the same effect if you purled every row – but most knitters prefer to knit every row). If you want to knit garter stitch “in the round”, you would knit one row and then purl one row – so most patterns using garter stitch are for flat pieces rather than circular knit pieces. The pattern produces a knitted fabric with ridges on each side that is essentially reversible – it looks very much the same on the right side as the wrong side. It takes two rows to make 1 ridge. The garter stitch is great for borders because it will not curl and lays flat once knitted. Many afghan and baby blanket patterns have a garter stitch border and it is often used as the basis for wash clothes and placemats.

Stockinette Stitch: this stitch pattern is the most commonly used knitted fabric. This stitch pattern produces a fabric with flat “V” shaped stitches on the right side and bumpy stitches on the wrong side. It is also known as flat knitting, tricot or jersey knit. Stockinette stitch consists of knitting one row, turning your work and purling one row if you are knitting a flat piece. If you are knitting in the round, you knit every row. Stockinette stitch fabric curls on the edges and at the top and bottom – it makes a good fabric for the body of a garment, but usually requires another stitch pattern for edging and or borders. It also stretches lengthwise when worn.

Reverse Stockinette Stitch: this is exactly what it sounds like – it is simply stockinette stitch fabric used with the purl side as the right side. It has all the properties of the stockinette stitch, but in addition, it will also stretch widthwise. You can see how the 3 stitches differ in the picture below:

If you look at the pictures of my teddy bear baby blanket – you will see how the teddy bear is formed by using the stockinette and reverse stockinette stitches together to form the pattern. This is a good example of how they can be combined to form textured patterning. Aran knitting patterns often combine stockinette, reverse stockinette and garter stitches as part of the textural patterning. Again, here are examples where the stitching is actually very straightforward and easy – but produces a fabric that looks complex because of the wonderful textures.

Note: For information on tension issues occurring with garter stitch, stockinette and reverse stockinette stitch, see my post on Master Knitter Level I — Swatches #1, 2 & 3.

Knitting Socks in Waiting AreaKnitting Socks in Waiting Area

August 26, 2009| Lindy| 0 Comments| 11:55 pm

Yesterday, I had the role of being supportive of my DH while he underwent some tests at our local hospital. (Nothing serious, just part of routine maintenance for the over 55 crowd.)

Anyway, I decided to take along a pair of socks I am knitting as my “keep occupied” project for the time I would be sitting in the waiting area. I am doing cuff down, two at a time on 2 circular knitting needles. So I pulled out my knitting and started to knit away while I sipped on a cup of coffee. An older woman walked into the group of chairs where I was sitting — and pulled out her knitting!

She was knitting something on dpn’s in a pretty dark green yarn. For a time, we sat and knit without any conversation. Then, she put away her knitting and came over and sat next to me and chatted. (I think she was anxious about whomever she was waiting for, but she never really said.) I learned that she was working on a pair of mittens and she was very curious about the method I was using for knitting socks and my self-striping yarn. We exchanged bits of information about yarns and knitting and then she was called to go back with her family member while he/she recovered.

It’s interesting how knitting forms a link and an introduction for us. I know it made the time in the waiting room go by more quickly for me and I’d like to think it eased my companion’s anxiety a little and helped her time in the waiting room pass more pleasantly.

P.S. Started the socks so that I would have an easy knit project for the knitting guild meet ups. More on the guild in another post. I promise to post a picture of the socks when done.