WIP: Cardigan & Romper for New Grandson

November 15, 2009| Lindy| 0 Comment | 10:29 am

Categories:

Okay — I swatched some more on this cardigan project. Earlier I had posted about Things Learned from a Swatch. Well, I continued to be dissatisfied with my color selections — I really just do not like that light aqua color for this sweater. So, I went back to my LYS and bought up all the teal color they had — which is the color I really wanted for the main color on the cardigan. The problem is that there isn’t enough of this color to do both a cardigan and a romper to match.

So, standing in front of the yarn bin at the store, I decided that I’d try using a combination of the teal, the red AND a darker blue. There was enough of the darker blue in one dye lot to do the romper and there was 1 ball of another dye lot left. Since I only need 1 ball of the darker color to do the alternating 3 color pattern in the cardigan, I bought this ball as well because the color variation is not that different between the two dye lots and since it will be mixed in with the other colors, it should work out okay.

Swatch_Cardigan3 Here’s my swatch with the new color scheme added. The darker blue color definitely shows up better than the lighter blue against the teal color that I want for the main color. I have started knitting the romper in the darker blue and I think I’m going to really like the coordinated outfit that will result. This project is a bit challenging because I am knitting on size 0 and size 1 needles to get the right guage. Lots and lots of small stitches…

The Roomba Ate My Socks!The Roomba Ate My Socks!

September 17, 2009| Lindy| 3 Comments| 6:15 pm

Roomba
I have a Roomba – which is a small robotic vacuum cleaner. You are supposed to be able to contain it to a single room using little devices called “lighthouses”. I really like this little guy for frequent vacuuming of my kitchen. So, the other day, I turned it on and left it to run around the kitchen while I did some things in my office.

Well, it escaped the kitchen and headed off into the living room – where my two at a time socks using magic loop project was laying beside my recliner (I’d left them there the night before) …AND…the Roomba ate my socks!

I heard this weird little sound coming from the living room and went to investigate – and there I found the Roomba thrashing about entangled in my 40” circular needle and the yarn from one of the socks. (I was so traumatized that I forgot to take a picture.)

After turning the Roomba off, it took me several minutes to remove the yarn from around the various moving parts and then deal with the fact that the circular needle had somehow ended up wrapped around one of the wheels. Eventually, I succeeded in extricating my circular needle – but it was a close call, as I had begun to consider the possibility of having to cut the cable. (WHEW!) Fortunately – one sock was still on the circular needle. The other, however, was laying in the middle of the floor – off the needle and minus its ball of yarn. I tenderly picked up this wounded creature and set it aside to recover from all the trauma.

I discovered that the lighthouse that should have prevented Roomba from going into the living room wasn’t working (dead batteries). Once I replaced the batteries, the darn little thing worked just fine and stayed in the kitchen where I wanted it to be.

Socks_BackTog
Happy News! – I was able to frog the wounded sock back to a point that I knew where I was in the pattern and then pick up the stitches and reconnect the yarn to the sock as I reknit it back to where it had been before it was attacked by the Roomba. It is now back on the same circular needle with its brother.

Helpful Swatch Part 5: Substituting One Yarn for AnotherHelpful Swatch Part 5: Substituting One Yarn for Another

August 31, 2020| LindyBeir| 0 Comment| 8:00 am

Many times a knitter will select a pattern to knit only to discover that the yarn used in the pattern is either not available or there isn’t a sufficient quantity available for purchase or it costs more than what the budget allows. So, that leads to finding a reasonable substitute to use. I have seen many forum posts in Ravelry where knitters have had difficulty making a proper substitution.

The first step in substituting one yarn for another is to look for a yarn of similar fiber composition that has approximately the same weight and recommended gauge as the yarn listed in the pattern. By this, I mean if the yarn used in the pattern is worsted weight (size 4), it’s best to find another worsted weight yarn to use as the substitute. If you are purchasing from a local yarn shop, the staff may help you find a substitute. If shopping online, Yarnsub.com is a helpful website that can be used to guide your initial search. Another resource is Ravelry – if the pattern is available in the Patterns database, you can look at others’ projects to see what yarns have been used. Regardless, once you pick your substitute yarn – you’ll need to swatch to find your gauge before you cast on and begin knitting the pattern.

Question: “I’m not getting the same gauge with my substituted yarn as the gauge stated in the pattern – what do I do now?

Here are some options to consider:

Change needle size and reknit the swatch to see if you can match the gauge. If you are getting more stitches than the stated gauge – go up one or two needle sizes. If you are getting fewer stitches than the stated gauge – go down one or two needle sizes. If you succeed in matching gauge with the change in needles and you like the fabric you are producing, then simply follow your pattern and knit with the size needle that helps you get gauge.
If you still can’t get gauge after changing needle sizes, but you like the fabric you are getting, calculate the number of stitches you need to cast-on to match your chest measurement and check the pattern to see if there is a size that uses the same number of stitches. You may still need to make adjustments in shaping if your row gauge is different from the pattern.
Use the pattern as a guide only – use the schematic plus any adjustments you need to make and then determine the stitch counts and rows needed to make the garment with your own gauge. (A good reference for this is Knitting Pattern Essentials by Sally Melville)

Here’s the next issue for substituting one yarn for another: Does the substitute have the same weight and yardage as the original yarn? If it does – you are in luck and can simply buy the same amount of yarn as what is given in the pattern for the size of the garment you want to knit. (Remember to buy an extra one for swatching.) However, in most cases there is a difference in yardage and/or weight between the substitute and the original yarn – which leads to the question: “How much of my substitute yarn do I need? This brings us back to the basic math I covered in my previous post: “To determine the number of skeins, balls or hanks of yarn you need: Divide the number of yards by the number of yards in the skein. Or divide the total number of grams by the number of grams of the skein. Remember that you will want one extra skein for swatching. “

Fisherman’s Rib StitchFisherman’s Rib Stitch

September 14, 2020| LindyBeir| 0 Comment| 8:00 am

I have just added Fisherman’s Rib to my Stitch Library. This is an interesting rib pattern that uses “knit 1 below (k1b). K1b is also used in the Bee Stitch and if you want more information on it, here are links to that information.

Post on Bee Stitch and Knit 1 Below

Bee Stitch Pattern

This ribbing pattern results in a fluffy, soft and warm ribbing that is similar to the brioche rib stitch. In fact, while researching Fisherman’s Rib, I found several places where it is described as a variation in the brioche technique. Nancy Marchand, author of Knitting Brioche, states:

“In the Netherlands, both brioche stitch and Fisherman’s Rib are called patentsteek. The method of working the stitch is different but the end result is the same.”

The main difference between the brioche stitch and fisherman’s rib is that you use yarnovers combined with slipped stitches to form the fabric in brioche and you use k1b to create fisherman’s rib. There are several different ways to make the Fisherman’s Rib stitch and I have included these in my Fisherman’s Rib Stitch instructions.

I have used fisherman’s rib to make several lovely warm hats. It would work well for a warm scarf or a cowl as well. This stitch pattern will use approximately 30% more yarn than regular 1 X 1 ribbing and should be done on needles that are one to two sizes smaller than what you would normally use for the yarn you select.

There isn’t a lot of information on how to decrease or increase when doing fisherman’s rib, and it took me awhile to find ones that worked well for my hats. I will share that information in my upcoming posts.