Written by: Lindy
August 12, 2010
I am now half way through my Summer Knitting project of knitting a dozen dishcloths. Here are the three I have just finished:
Dishcloth #4 – Crocus Buds
Pattern from the Leisure Arts “Knitting Kitchen Brights Dishcloths” brochure. Yarn: Lion Brand Kitchen Cotton, color Banana. This was an interesting openwork pattern. The “crocus buds” are created by pulling a stitch over the next two stitches on the needle. It is a simple 6 stitch pattern over 4 rows with yarn overs creating the open patterning between the “crocus buds”.
Dishcloth #5 – Elfin Lace
Pattern from Leisure Arts “Knitting Kitchen Brights Dishcloths” brochure. Yarn: Lion Brand Kitchen Cotton, color Natural. Easy lace pattern, that knits up into a nice dishcloth. The Elfin Lace pattern is an eight stitch pattern done over 8 rows.
Dishcloth #6 – Trinity Stitch
Pattern from Leisure Arts “Knitting Kitchen Brights Dishcloths” brochure. Yarn: Lion Brand Kitchen Cotton, color Natural. Lovely textured pattern produced by using the “Trinity Stitch”. I loved knitting this one. The “Trinity Stitch” is a neat textured pattern.
Link to “Kitchen Bright Dishcloths” from Leisure Arts (2004).
Written by: Lindy
July 16, 2010
In the Knitter’s Almanac, Elizabeth Zimmerman suggests doing a Pi Shawl during the month of July as a perfect knitting project to take along with you on your summer travels. Well, I started a Pi Shawl following her instructions in the Knitter’s Almanac in July of 2008. Umm, yeah. July 2008. I took this project with me during that summer on various trips, including a trip to Spain in September. But then, for some reason I don’t fully remember, I set it aside — and left it sitting until July 2010.
As you can see from the above photo, I had made quite a bit of progress on this shawl. In fact, I had made it all the way to the last set of increases, with 576 stitches on the needles. If you are not familiar with the concept of the Pi Shawl — it is simply this: you start out with a small number of stitches (9 in this case) and double the number of stitches every so many rows. The number of rows between increases grows by 3′s or thereabouts and you end up with a circular shawl made up of a whole lot of stitches. (EZ writes that you can keep increasing as long as you wish — but she stops at 576 as it seems to be enough. I think I agree.)
So — after I figured out where I had left off, I started knitting away on those 576 stitches using the lace patterns given in the Knitter’s Almanac. When I started this shawl, my plan was to knit it per EZ’s instructions. Knitting the lace patterns required knitting 42 rounds and I decided to knit an additional 2 rounds after that. Here’s what it looks like at this point:
Here a two additional views. The first is looking down at the center of the shawl with the circular needle underneath and the other is looking down with the circular needles on top.
It looks like a big lacey bag at this point. And it is really difficult to tell exactly how large this shawl actually is. I’m estimating that it is somewhere around 60″ in diameter, but I really won’t know until I get it off the needles and get it blocked.
Now, getting the shawl off the needles is going to take some time. This is because I am knitting on a lace border and using up the edge stitches as I go. I am using the lace border pattern on page 82 of the Knitter’s Almanac. Now, this was a bit tricky to get started — because it doesn’t really tell you how to incorporate knitting off stitches when you knit the lace pattern. EZ does describe the basic process earlier in the chapter — but the specific directions are not given with the lace border pattern itself.
It took me a little while to figure things out — and since I don’t want to have an issue with dropping any of those 576 stitches, I started by putting in a lifeline. From this point forward, I am using the right needle of my circular needle and a dpn to knit the border, so I put a point protector on the left needle to prevent stitches from sliding off and cast on 11 stitches for the border:
The lace border pattern consists of 4 rows, and you K2Tog each time you knit back toward the shawl’s edge stitches, incorporating 1 edge stitch into the border. This means you use up 2 stitches every 4 rows of border. (Yeah…it’s gonna take awhile.) Here’s the start of the border after 20 rows:
I like the border… Only 566 stitches to go. I hope to finish this before the end of July. I will post pictures of the finished shawl when I get it blocked.
Here’s a link to Elizabeth Zimmermann’s Knitter’s Almanac
Written by: Lindy
February 23, 2010
I think every child should have a teddy bear to love, so I am knitting my baby grandson a teddy bear. The pattern is from “Knitted Toys” by Debbie Bliss. When completed, this will be about 16-19 inches — which is a good size for a teddy bear.
I initially started this project using Peaches & Cream cotton worsted yarn in teal blue. I knitted up the first leg and started on the second one — and then decided I didn’t like the way the yarn was knitting up and I also didn’t like the color for the teddy bear. So, I switched yarns and colors and started over.
The yarn I choose is Knit Picks Shine Sport yarn in Willow colorway. This first photo is of the yarn and the beginning of the right leg.
I have knitted both legs at this point and plan to work on the body tonight while watching the Olympics. I have been using right and left slanted increases and decreases to help make the shaping more defined. [One of the things that I have learned while doing the Master Knitter Level I swatches with different increases.]
Written by: Lindy
January 17, 2010
My first grandson is due January 30. I have already knit a couple of items for this coming grandchild – but I want to knit a romper and matching cardigan for him as well. I’ve posted about the swatches for the cardigan, but not about the romper.
I am about 50% done with the romper. I am using Baby Ull (Dale of Norway) in a navy blue colorway. The legs were knit using size US 0 (2.00 mm) needles and then once joined together for the hip section, knit using US 1 (2.50 mm) needles. Tiny needles, lots of stitches. The pattern is #203 from Dale of Norway.
I doubt I will get this done before the baby arrives – but since I am knitting the 12 months size, it shouldn’t matter if I finish it after he comes home from the hospital.
Written by: Lindy
January 12, 2010
I knitted the heel and had about half of the gussets done on these socks when I decided that I did NOT like the way the picked up stitches for the gussets looked. They weren’t tight enough and appeared to have small holes along the picked up edge. Frustrating, VERY frustrating – especially since these socks must be knit to very high standards. I don’t know if the problem is the way I picked up the stitches – or if I pulled the yarn too tight. I have found that the Regia Stretch yarn used for these socks can be overstretched – it is a very stretchy yarn.
I put the socks in “time out” over the Christmas holidays – just too stressful to deal with them given all the other demands of the season. Last week, I pulled them out, put in lifelines at the instep and the end of the heel turn and then frogged them back to the point where I need to pick up the gusset stitches. 
I plan to tackle the picking up of the gusset stitches this week, paying special attention to how the stitches form as they are picked up…and trying to avoid overstretching the yarn…I will let you know how it goes.
Written by: Lindy
January 11, 2010
My DS put “socks that won’t wear out at the heels” on his Christmas list. It was a late request – and not one that would I would likely be able to meet by Christmas – but it was an invitation to knit socks for someone I love!
So – I started a pair of socks – plain label version, cuff-down with 2 X 2 ribbing for the heel and instep. I used Knit Picks Stoll in Carbon Twist colorway. I got about 6 inches of the cuff done before Christmas and so I wrapped the “in progress” socks up along with two additional balls of yarn (Knit Picks Stoll – Merlot colorway) for another pair of socks and gave it to him as a Christmas present, with the promise that they would actually become socks.
The Carbon Twist socks are now about 75% complete – I am working on the foot and heading for the toe. I love the way this yarn knits up – it’s great for a pair of men’s socks. I knit the cuff for 6 inches on size US 1 needles (2.50 mm) and then went down to size US 0 (2.00 mm) for another 2 inches on the cuff , the heel flap and approximately half of the gusset before switching back to the larger needle. This produces a denser knit heel and should increase the wearbility of the socks. I intend to knit the toes on the smaller needles for the same reason.
For the Merlot colorway yarn, I am planning on doing the “Manly Aran” socks pattern from Antje Gillingham’s Knitting More Circles around Socks. This is a toe-up pattern and I am looking forward to trying this out using Magic Loop.
Written by: Lindy
January 3, 2010
I’ve signed on for a Ravelry group called “10 in 2010″. The idea is to identify 10 knitting projects you want to complete in 2010 and share your progress with the group. It’s a variation of a knit along.
So here is my “10 in 2010″ project list:
- Baby Romper & Cardigan(from Dale of Norway – Baby 203) in Baby Ull
- EZ Green Sweater – because I want to learn to steek – yarn to be determined
- Manly Aran Socks (from Knitting More Circles around Socks) in Knit Picks Stoll – merlot colorway
- Finish Cable Rib Socks in Knit Picks Risata – baby doll colorway
- Socks for me using Zueberball yarn – pattern to be determined
- SFS Socks in Regia stretch – olive drab color
- Teddy Bear (from Debbie Bliss Toy Knits) – using Peaches & Cream yarn
- Socks using Brown Sheep Wildfoote yarn
- Socks using Debbie Norville Serenity Yarn
- Hat & matching scarf for me — yarn and pattern to be determined
This is an easy way to set some goals for knitting projects. If you are on Ravelry and are interested in joining, go to Groups and look for “10 in 2010″. Happy Knitting.
