Author: LindyBeir

Provisional Cast OnProvisional Cast On

April 6, 2021April 6, 2021 | LindyBeirLindyBeir | 0 Comment | 9:31 am

A Provisional Cast On is a method for making a temporary cast on that can be removed later. The method I use requires a crochet hook and either waste yarn or an extra cable from a circular needle. If you are using waste yarn, you should use a slippery yarn in a contrasting color so that the cast on stitches can be easily removed.

Where this cast on is used:

  • Knitting hems or edges where you want to add a border or knit in the opposite direction
  • Knitting scarves when you want the ends to be identical

To make the Provisional Cast On use a crochet hook the same size equivalent as your knitting needle. Start by making a slip knot with waste yarn and placing it on the crochet hook.(This does not count as a stitch.) Hold your knitting needle in your left hand and the crochet hook in your right hand. Make a stitch over the needle or cable by holding the yarn strand under the needle and taking the crochet hook over the needle, grabbing the strand and pulling it through the loop on the crochet hook. Repeat this process until you have the desired number of stitches.

If you are a crocheter, you can do a Provisional Cast On by making a crochet chain and then knitting into the bumps on the back of the chain. Tips: 1) Make the chain longer than the desired number of stitches; 2) Use a crochet hook one or two sizes larger than the knitting needle you will be using to make it easier to go into the bumps.

Links for Provisional Cast Ons:

Provisional Cast On – One Step Method

Crochet Chain Provisional Cast On

Read MoreRead More

Long Tail Cast OnLong Tail Cast On

March 9, 2021March 9, 2021 | LindyBeirLindyBeir | 0 Comment | 10:06 am

The Long-Tail Cast On is one of the most common and popular cast ons. It is an all purpose cast on that gives an attractive and elastic edge and works in almost every type of project. Because of its structure, this cast on creates the first row of your knitting – which is usually considered the wrong side of the work for stockinette stitch.

As the name implies it starts with a long tail – which can be a challenge for a knitter to figure out how long to make the tail before you start making stitches on your needle. A general rule of thumb for this length is 3 times the length you need to form the number of stitches to cast on. Some knitters wrap the yarn around the needle the number of times that equals the number of stitches. I’ve used both methods and both work fairly well.

The cast on starts with a slip stitch (some knitters omit this step). You then form a “slingshot” by holding the needle in your right hand and using the thumb and forefinger of your left hand so that one of the two strands wraps around the thumb and the other wraps around the forefinger, forming a “Y”. The tail strand should go over the thumb and the working yarn should go over the forefinger.

To form a new stitch, put the needle under and into the loop on the thumb, then go over the yarn on the forefinger and bring the strand through the thumb loop. Drop the yarn off the thumb and gently tighten the loop on the needle. Repeat until you have the desired number of stitches.

There are several variations of this cast on. I have included a link for the Alternating Long Tail Cast on, which provides a way to alternate knit and purl stitches for a ribbing and gives a moderately elastic edge.

Everything About the Long-Tail Cast On

Long-Tail Cast On in Pattern – Alternating Long-Tail CO

Read MoreRead More

Cast On Methods: Cable Cast On and Backwards LoopCast On Methods: Cable Cast On and Backwards Loop

February 22, 2021February 22, 2021 | LindyBeirLindyBeir | 0 Comment | 3:14 pm

The Cable cast on is very similar to the knitted cast on. It starts the same way as the knitted cast on, where you make a slip knot and place it on your needle and then knit through the loop to form the next stitch. After this step, instead of knitting another stitch and putting it back on the right needle, you insert your needle between the two stitches to form the next loop and then place that back on the right hand needle. You continue making stitches by going between two stitches to make the loop.

Where I use the Cable cast on:

  • When I need a firm edge such as the border on a blanket
  • When I need to add stitches at the end of a row
  • Making a one -row buttonhole

Backwards Loop (e-Wrap) Cast On is a very basic cast on and is one of the cast ons often taught to beginning knitters. It starts with a short tail and a slip knot placed on a knitting needle. You then take the working yarn and wrap it over your thumb , insert the needle under the loop on the outside of your thumb and let it slide off your thumb onto the needle and tighten up the stitch.

Where to use the Backwards Loop Cast on:

This is an elastic cast on that can be used for most projects needing a stretchy edge (hats, gloves). You can also use it to add stitches in the middle of rows (i.e. the underarm of a top down sweater or at the base of the fingers of a glove.) You can also use it to add stitches at the end of a row. The loops between stitches can look sloppy so you need to pay attention to how you make your loops.

Here are links to YouTube videos for these two cast ons:

Knitting Help – Cable Cast On

Refined Cable Cast On

How to Knit: Backwards Loop Cast On

Technique Tutorial: Backwards Loop Cast On (shows how to cast on in middle of stitches)

Read MoreRead More

Cast On MethodsCast On Methods

February 17, 2021February 17, 2021 | LindyBeirLindyBeir | 0 Comment | 11:48 am

This is the first post about Cast Ons. There have been several books written about different cast on methods as well as many chapters in general knitting references and YouTube videos. What I know now as a long time, more experienced knitter is that there a lots and lots of different ways to accomplish the task of putting the first stitches on your needles so that you can begin to knit. But when I first started knitting, I only knew one way to cast on. That’s because, as I believe is the case for most beginners, I was only taught one way to cast on. And I suspect that my knitting teacher taught me that cast on because it was the method that she knew.

While visiting my older sister, I learned to knit from a woman who sold yarn kits and gave knitting lessons in her apartment. So, my first knitting project was a slipper pattern kit that came with the yarn, a set of needles and an easy beginner level pattern. I think I had maybe two lessons from her and I was off to knit on my own. My teacher taught me the “Knitted Cast On” method. I used this method for a long time before discovering another cast on method – the “Backwards Loop (or E-wrap)” cast on.

The first time I encountered the notion that there were other ways to cast on was when I was knitting my very first sweater and I ran into an issue and needed some help with my project. Now, I lived in a very small town and there weren’t many people who knew how to knit. My mother located a neighbor who did and was willing to help me, so I went over to her house with my sweater. The neighbor did help me get my problem fixed – but what I remember most clearly about this session was what she said about my cast on: “Oh, you cast on wrong.”

My 11 year old self didn’t comment on that statement, but I was doing a slow burn because “I DID Cast on the right way.” I had used the knitted cast on that I knew. A lot of time passed between this incident and my learning that there are many ways to accomplish the same thing in knitting. And – I am still learning different ways to cast on!

So, in this series of posts about cast ons, I will discuss the cast ons that I currently know how to do and when and with what projects I use them. Since it was the first one I learned, I’m starting with the Knitted Cast On.

The knitted cast on is an easy cast on to learn as a beginner. Essentially, you create your first stitch on your needle by making a slip knot, placing it on the needle and start the cast on by knitting  a stitch through the loop using your other needle. Once you have the stitch on the right hand needle, you slip it back onto the left hand needle and tighten it up a little, then knit into that stitch and repeat the process until you have  the desired number of stitches.

Where I use this cast on:

  • When I want a fairly firm , yet somewhat stretchy edge: project like scarves, some shawls, blankets
  • Casting on for underarm stitches or thumb gussets in gloves or mittens

Here’s a YouTube video on this cast on: Knitting Help – Knitted Cast On

Next Post: e-Wrap (Backwards Loop) and Cable Cast On Methods

Read MoreRead More