October is Breast Cancer Awareness month. I am a ten year breast cancer survivor and at this time of year I like to remind my friends and followers about the importance of having an annual mammogram. I was well overdue for my mammogram when my breast cancer was detected. Fortunately, it was in the early stage and I received good treatment and am now cancer free. But I do not miss my annual mammogram.
So, my friends — Have you had your annual mammogram this year? If not, please get it scheduled and get it done. It’s important to take care of your health and this is one thing that you must do for yourself every year. One in eight women over the age of 40 will develop some form of breast cancer.
For those who are either dealing with breast cancer treatment or have a loved one who is — I have designed a Turban Style Chemo Hat — one knitted using worsted weight yarn and one knitted in sport weight yarn. Both are available for free.
I have just added Fisherman’s Rib to my Stitch Library. This is an interesting rib pattern that uses “knit 1 below (k1b). K1b is also used in the Bee Stitch and if you want more information on it, here are links to that information.
This ribbing pattern results in a fluffy, soft and warm ribbing that is similar to the brioche rib stitch. In fact, while researching Fisherman’s Rib, I found several places where it is described as a variation in the brioche technique. Nancy Marchand, author of Knitting Brioche, states:
“In the Netherlands, both brioche stitch and Fisherman’s Rib are called patentsteek. The method of working the stitch is different but the end result is the same.”
The main difference between the brioche stitch and fisherman’s rib is that you use yarnovers combined with slipped stitches to form the fabric in brioche and you use k1b to create fisherman’s rib. There are several different ways to make the Fisherman’s Rib stitch and I have included these in my Fisherman’s Rib Stitch instructions.
I have used fisherman’s rib to make several lovely warm hats. It would work well for a warm scarf or a cowl as well. This stitch pattern will use approximately 30% more yarn than regular 1 X 1 ribbing and should be done on needles that are one to two sizes smaller than what you would normally use for the yarn you select.
There isn’t a lot of information on how to decrease or increase when doing fisherman’s rib, and it took me awhile to find ones that worked well for my hats. I will share that information in my upcoming posts.
Many times a knitter will select a pattern to knit only to discover that the yarn used in the pattern is either not available or there isn’t a sufficient quantity available for purchase or it costs more than what the budget allows. So, that leads to finding a reasonable substitute to use. I have seen many forum posts in Ravelry where knitters have had difficulty making a proper substitution.
The first step in substituting one yarn for another is to look for a yarn of similar fiber composition that has approximately the same weight and recommended gauge as the yarn listed in the pattern. By this, I mean if the yarn used in the pattern is worsted weight (size 4), it’s best to find another worsted weight yarn to use as the substitute. If you are purchasing from a local yarn shop, the staff may help you find a substitute. If shopping online, Yarnsub.com is a helpful website that can be used to guide your initial search. Another resource is Ravelry – if the pattern is available in the Patterns database, you can look at others’ projects to see what yarns have been used. Regardless, once you pick your substitute yarn – you’ll need to swatch to find your gauge before you cast on and begin knitting the pattern.
Question: “I’m not getting the same gauge with my substituted yarn as the gauge stated in the pattern – what do I do now?
Here are some options to consider:
Change needle size and reknit the swatch to see if you can match the gauge. If you are getting more stitches than the stated gauge – go up one or two needle sizes. If you are getting fewer stitches than the stated gauge – go down one or two needle sizes. If you succeed in matching gauge with the change in needles and you like the fabric you are producing, then simply follow your pattern and knit with the size needle that helps you get gauge.
If you still can’t get gauge after changing needle sizes, but you like the fabric you are getting, calculate the number of stitches you need to cast-on to match your chest measurement and check the pattern to see if there is a size that uses the same number of stitches. You may still need to make adjustments in shaping if your row gauge is different from the pattern.
Use the pattern as a guide only – use the schematic plus any adjustments you need to make and then determine the stitch counts and rows needed to make the garment with your own gauge. (A good reference for this is Knitting Pattern Essentials by Sally Melville)
Here’s the next issue for substituting one yarn for another: Does the substitute have the same weight and yardage as the original yarn? If it does – you are in luck and can simply buy the same amount of yarn as what is given in the pattern for the size of the garment you want to knit. (Remember to buy an extra one for swatching.) However, in most cases there is a difference in yardage and/or weight between the substitute and the original yarn – which leads to the question: “How much of my substitute yarn do I need? This brings us back to the basic math I covered in my previous post: “To determine the number of skeins, balls or hanks of yarn you need: Divide the number of yards by the number of yards in the skein. Or divide the total number of grams by the number of grams of the skein. Remember that you will want one extra skein for swatching. “
I have covered the basics of how to make a Gauge Swatch and calculate your stitch and row gauge in my previous three posts. Today’s topic will cover some basic math to help you estimate the yardage that you need using your yarn, your needles, and your gauge to make a sweater.
Let’s say you want to make a sweater using yarn from your stash and you need to know if you have enough to make it. To make this estimate, you need the measurements for the sweater you want to make. If you are using a pattern, the finished measurements should be stated within the pattern – ideally on a schematic. Some patterns may only state the desired measurements within the text of the pattern and you may have to read through to find them. If you are making the sweater without using a pattern – you would use the measurements of the individual who will be wearing the sweater.
The image below shows a schematic for the back of a sweater of a drop sleeve sweater. The back is 28 inches long from the hem to the neck and it is 20 inches wide. Both the front and the back of this type of sweater are essentially rectangles.
Schematic of Back/Front of Sweater
The schematic for the sleeves of this sweater are shown below.
Schematic of Sleeve
At this point, you have the numbers you need to calculate the number of square inches of fabric that you need to make for this sweater. For the front and back, multiply the length by the width on the schematic and then multiply that number by 2. Using the numbers from my example above:
20 * 28 = 560 560*2 = 1120 square inches for front and back.
The sleeve is a trapezoid shape. The formula for the area of a trapezoid is:
[(b1+b2) * h] / 2
Where b1 is the width at the bottom of the sleeve(8”) and b2 is the width at the top of the sleeve(15”) and h is the length of the sleeve(18”). Using the numbers from the sleeve schematic, the area for one sleeve is 207 square inches. Since you need two sleeves, you then need to multiply the area of the sleeve by two. (414 square inches)
Now, here’s a short cut – if you place your sleeves next to each other so that the tops of the sleeves are parallel – you have a parallelogram. To get the area of this parallelogram you simply multiple the width(15”+ 8” = 23”) by the length(18”). Try it – you’ll get the same number as above.
Add the square inches for the front and back to the square inches for the sleeves and you have the total number of square inches of fabric in the sweater. Now that you know the total number of square inches of fabric you need, you will need to use the yardage and weight information of the yarn you want to use to estimate how many skeins or balls of yarn your sweater requires. The yardage per weight of the yarn will be found on the yarn label – see image below:
You will use the yards per gram value in the estimate for total yardage. Now you need to knit a swatch. The swatch should be in the same stitch pattern that you plan to use for the body of your sweater. This swatch does not need to be the same size as your gauge swatch, but it should be wide enough and long enough to get an accurate weight, length and width measurement. After you knit this swatch, you will measure its weight using a scale that measures to the nearest tenth (0.1) of a gram. Next measure the length and width of the swatch and multiply these values together. This gives you the number of square inches in your swatch. Now divide the number of grams by the number of square inches.(Do not round). You now know what 1 square inch of your yarn weighs. This is the number you need to calculate how much yardage you need for your sweater.
Example: My swatch measures 3.5 inches by 4.5 inches, which gives me 15.75 square inches. The swatch weighs 9.6 g. Dividing 9.6 by 15.76 gives me 0.622 g/square inch.
Here’s the final set of calculations:
Take the total number of square inches of fabric and multiply it by the number of grams per square inch. This gives you the total weight in grams for your sweater.
Total Number of Square Inches * grams/inch2 = Total grams of fabric
Total Grams/Square Inches = (1120 + 414) * 0.622 = 954.148 g
Now take the yards per gram value from the yarn label. (For example 218 yds/100grams). Divide the yds by the grams to get the number of yards in 1 gram of yarn. (For example: 218yards/100grams = 2.18 yards per gram.) Multiply the total number of grams of fabric by the number of yards per gram to get the total yardage for the sweater. Using the numbers from the examples above:
Yards per gram = 2.18 yds/g
Total Yards of Yarn = 954.148 * 2.18 = 2080 yds
To determine the number of skeins, balls or hanks of yarn you need: Divide the number of yards by the number of yards in the skein. Or divide the total number of grams by the number of grams of the skein. Remember that you will want one extra skein for swatching. (In my example, I would need 9.5 skeins, so I would want 11 skeins with one extra for swatching)
What to do if you don’t have the yarn label
To determine how many yards of yarn you have when you do not have the yarn label or any information, simply measure out 10 yards of your yarn and weigh it. Divide the weight by 10 and you have the weight for 1 yard of yarn. Now weigh the skeins/hanks of yarn and multiply by the weight of 1 yard. This will give you the number of yards for each skein/hank.
